Davis Instruments WeatherLink Anleitung zur Fehlerbehebung PDF herunterladen (Seite 17)

Troubleshooting Guide

Program Problems

 The barometer graph on the Bulletin does not “fill in” completely.

When you first load the bulletin, the barometer graph will only fill in com-

pletely when you have data in your database for the last six hours. Make sure

of the following:

• There is data in your database for the span of the barometer graph.

• The time and date of the stored barometer data is correct in your database.

• The time and date on the PC is correct.

• The time and date on the weather station are correct.

 No wind direction reading (or dashes instead of a reading) appears in my database.

Be aware that if there is no wind speed when the direction is being sampled,

wind direction is not recorded. During intervals with no wind speed, no direc-

tion will be recorded.

Note: Since high wind speed is sampled more often, it is possible to have a high wind speed but

no wind speed.

 My archive memory is empty and I know it should not be. What can I do?

First try using the Set Archive Interval command in the Setup menu to clear

the archive memory and see if this corrects the problem. You will lose any

undownloaded data in your archive memory, but all your calibration numbers

and alarm settings will remain intact. If this doesn’t work, restart your weather

station by removing the AC power adapter and the backup battery and then

reconnecting them. All data which has not been downloaded will be lost. You

will also have to reset all console settings such as the barometer, calibration

numbers, and alarm settings.

 After successfully downloading, the data does not appear in my database.

Where is it?

The most likely possibility in this case is that the time and date on your

weather station are incorrect. This usually happens if there is a power outage

and you don’t reset the time and date afterwards. In this case the data was writ-

ten into the wrong time and month. Correctly set the time and date on your

weather station and all future data should download correctly.

It is also possible, if you have multiple stations, that you downloaded data into

the wrong station’s database. Make sure the desired station is open before

downloading.

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Davis Instruments WeatherLink Anleitung zur Fehlerbehebung Seite 17